Design your drapes using our Crewel Fabrics, we can make curtains/ drapes as per your measurement and style.
Send us the measurements of your windows/ doors today and we shall calculate fabric requirement for you.
Our charges are US$ 10.00 only per width including stitching and lining cost.
For curtains with measurements greater than this, an extra $5 will be charged for every extra width. For example, a curtain of 1 width will be charged 10 USD, while a curtain of 2 widths will be charged 15 USD (10+5) and that of 4 widths will be charged 25 USD (10+5+5+5).
We make curtains in all styles - flat-top, pinch-pleated top, curtains with 7 cm wide gathering tape, eyelet-top, tab-top, rod-pocket top, etc. Matching pelmets and valances are also offered.

Flat top Curtains

Curtains in flat-top style where a flat non-gathering tape is attached on the reverse side approximately 2 inches from the top. Rings and hooks can be attached to this tape to hang the curtain from a rod.

Pinch-Pleat top Curtains

Pinch pleated curtains require two widths of fabric for each width of the finished curtain. So a 45 inch wide curtain will use 2 widths of fabric, each 45 inches wide. A flat non-gathering tape is attached on the reverse side approximately 2 inches from the top. Rings and hooks can be attached to this tape to hang the curtain from a rod.

Curtains with 7 cm Gathering Tape

Curtains in this style have a 7 cm (2.8 in) wide gathering tape attached on the reverse side approximately 2 inches from the top. The curtain tape needs to be pulled to gather the curtains. Each piece of tape has three strings running through it. You can pull the strings out, tie them together, and keep pulling until the curtain is the width that you want it.

Eyelet top Curtains

Curtains in eyelet-top style. A standard eyelet tape is attached on the reverse of the curtain.